finishing the fins and end plates
|
![finishing the fins and end plates](https://99mpg.com/getimage.asp?id=/workshops/designingandbuildi/finishingthefinsan/&filename=drillingandfinishingthefinsandendplates.jpg&mode=0) | |
finishing the plates and fins
|
made the three 1/4" plates, and drilled holes in all the fins. removed the sharp edges of all parts. ******* the plates slipped a bit which made the holes not be in the correct position, which took a lot of work to correct. Best clamp the plates tightly, or better yet drill each plate individually**********
|
|