aluminum tape again
Auto brake light
Back hoe log splitter
Black tape and PVC cement
Broken gas can cap
C-band dish solar furnace
Making a Cheap battery State Of Charge gauge more accurate
Cleaning the corroded buss bars from a Prius battery pack
Fixing small plastic gears
Forever solar desk lamp
How I splice audio cables
IMA motor coil shift in collision
Insight Battery pack turbo cooler
Insight Oil Pan second chance
Lifting the battery safely
making a ducted blower from a computer fan
Making an isolated hall effect current sensor with ring terminals
making a heavy workbench mobile
Making a simple IMA bypass connector from an old pack relay board
Making some custom solar panels
Measuring resistance of less than 1 ohm
Motorizing a snow blower chute
Put your exercize to good use?
Quick way to make a connector for checking the subpacks
Reading the blink codes
Real time external MPG display
Rear view Video cameras
Solar headlight
Soldering iorn degausser
Some uses of laser pointers
Taking Video of the dash
Those useful Prius subpacks
Using digital caliper to measure hole center to center distance
weed whacker motor converted to bicycle motor
When cleaning the EGR does not fix the hesatation
Where do you find high quality alligator clips?
Handy use for Aluminum tape.

aluminum tape again

aluminum tape again
Re-Sealing that can

I needed to varnish a piece of wood, and as usual, the cover of the can was stuck so strongly (had been previously opened) that I had to damage the seal to get the cover off. Faced with loosing the rest of the mostly full gallon of varnish, I pulled out the roll of aluminum tape again, and was able to seal the top.
Results:
I opened the can three weeks after sealing it, and the varnish was perfect, with no skin on the surface.Looks like it works.