Mounting the MIMA disable switch

Mounting the MIMA disable switch
mounting switch and routing wires
The Insight has three knock out inserts above the small pull out storage compartment (coin pocket) on the lower left of the dash.
Use a small flat blade screwdriver to pry out one of the inserts. The wire must be routed behind the metal spring clips that hold the door open, and over the brace and steering wheel harness(to keep it up and off your feet). The final attachment is a single twist around the center console upright column, and maybe a bit of black tape to hold it. Finally we plug it into the MIMA controller, and are ready to really do MIMA.