Jog the calibration

Jog the calibration
To jog the calibration, you must be moving over 19 MPH, and be in PIMA (mode 2). A single jog, is moving the joystick to the desired position, then allowing it to return to center. Each time you do this, you change the setpoint in that direction by 2 units out of a total of 118. Future software will detect the lack of the MAP signal , and will disable the PIMA mode until it sees a correct Map signal.

Pick up any loose tools, and make sure everything in back is secure, and go for your first MIMA ride. But don't go too far, as the real fun comes with the PIMA mode, and you still have 6 more wires to connect, and the temperature probes to test and install.